Motherboard Specification |
CPU |
Intel® Celeron N2930 SoC, 1.83GHz – 2.16GHz Burst, Quad-Core, 7.5W TDP/4.5W SDP Intel® Celeron N2807 SoC, 1.58GHz – 2.16GHz Burst, Quad-Core, 1MB, 4.5W TDP/3.0W SDP |
Memory |
1 * 204-pin DDR3L-1333 SO-DIMM up to 4GB |
VGA |
Intel HD Graphics, 313MHz - 854MHz |
LAN |
2 * Realtek RTL8111G PCI-E Gigabit LAN |
Audio |
Realtek ALC662 HD Audio |
Storage / Drive Bay |
1 * 2.5" SATA2 3Gb/s drive bay for HDD or SSD 1 * Shared mSATA/mini-PCI Express Combo slot (Full-size) |
Wireless / Mini-PCIE Slot |
1 * Mini-PCI Express slot (Half-size)
Wireless 802.11 b/g/n |
USB |
Embedded 1 * USB 3.0 and 5 * USB 2.0 |
Form Factor |
3.5" SBC (148mm x 102mm) |
Chassis Specification |
Product size |
152.6 (W) x 110 (D) x 34.8 (H) mm |
Color |
Black |
HDD |
1 * 2.5" Hard Disk Drive Bay (Only support SATA 2.5" HDD) |
Front I/O Port |
1 * Power Button 1 * Power LED 2 * HDD LED |
Rear I/O Port |
1 * USB 3.0 ports 3 * USB 2.0 ports 2 * RJ-45 ports 1 * DVI-I port 1 * SMA Connector for WiFi Antenna 1 * Line Out jack 1 * +9V ~ +24V DC-in jack |
Other Internal Headers |
These connectors may not be fully usable with chassis closed, but the information is provided for customer alternative uses.
1 * USB Headers for up to 2 * USB 2.0 ports
1 * 24-bit dual channel LVDS connector/inverter (CHRONTEL CH7511B chipset up to 1920 x 1200)
1 * Serial Port Header (RS232/422/485)
1 * 8-bit GPIO header
1 * AT/ATX Mode jumper |
Environment |
Operating Temperature : 0 ~ 40°C Storage Temperature : -20 ~ 85°C
|
Standard Accessory |
√ 60W AC-DC Adapter x1
√ Power Cord x1
√ Wall Mount Kit
√ DVI-to-VGA adapter x1
√ DIN RAIL x2
√ CD Disk x1
√ Manual x1
√ WIFI antenna (with HBJC365F3AW-2930-B model)
|
Functional |
Set Top Box, Thin Client, Car Entertainment, Smart Mini PC, POS/POI, KIOSK |
Packing |
Color Box Dimension: 265(W) x 100 (D) x 200 (H) mm
Gross Weight:1.5KG
Net Weight:1.3KG |
Certificate |
CE,FCC,ErP For Barebone CE,FCC,TUV,UL,CCC,CB,ErP For Power Adapter |
All in all, pretty good. Used as a small server.
Running FreeBSD 10. Installation was flawless.
Installed a Kingston SSD 30GB and a 2.5" 5400 SATA Drive. CPU Reaches 40C degrees, never been hotter. SSD runs at 55 C and the SATA at 43 C. Might fit a very small fan to be safe.
There is only on problem with this Motherboard under FreeBSD, as I figured it out, the Bluetooth devices is on a USB controller, which it FreeBSD dosn't like, I get a callback error (ubt_intr_read_callback). You have to force a shutown in rc.local at bootup, I dont use bluetooth on this, so it's all good.
This is a very good small minipc/server.